Free Building Calculators

Deck boards, concrete, footings, stairs and pavers — enter your dimensions, get real numbers. No sign-up, nothing to install, formulas shown so you can check the math.

Free forever No sign-up Formulas shown

Calculators

Every calculator uses actual lumber sizes (not nominal) and includes waste factors where they matter.

Not sure where to begin? Most projects start with the decking calculator to size the whole frame, then the deck board calculator for surface boards and the deck stair calculator for steps — while the concrete calculator and post hole concrete calculator cover the footings underneath.

Prefer to see the math worked out? Read How to Calculate Deck Boards — the complete walkthrough behind these tools.

Why builders use these

📏

Actual sizes, not nominal

A "6-inch" board is 5.5 inches after milling. Every calculation here uses the real dimension you'll hold in your hand.

📜

Show-the-work formulas

Each tool publishes its formula and a worked example, so you can verify any number before you order materials.

🛠️

Counts you can buy with

Results come out in boards, bags and screws — the units you actually shop in, with waste already included.

Questions

Yes — every calculator is free, requires no account, and runs entirely in your browser. Nothing you enter is sent anywhere.
The math is exact for the dimensions you enter; the assumptions (gap size, joist spacing, waste) are the standard values used by DIY builders and are all adjustable. Treat results as planning estimates, not engineering specifications.
No. These tools estimate material quantities only. Structural sizing and building-code compliance depend on your local rules — always check with your local building department.