Concrete Calculator

Get cubic yards and bag counts for slabs, footings and columns — with a waste factor built in.

Please check your inputs — values must be within the allowed ranges.

—
Cubic yards
—
80 lb bags
—
60 lb bags
—
40 lb bags

Print it for the supplier counter, or choose "Save as PDF" to keep it on your phone.

How to calculate concrete volume

Everything reduces to one idea — volume in cubic feet, then convert:

  1. Slab: length (ft) × width (ft) × thickness (in ÷ 12) = cubic feet
  2. Round footing/column: π × (diameter in inches ÷ 24)² × depth (ft) = cubic feet
  3. Cubic yards: cubic feet ÷ 27 — this is the number suppliers quote in
  4. Add your waste factor, then divide by bag yield for bag counts

Bag coverage chart

Yield numbers below follow the standard figures published by the major bagged-concrete brands — verify against the brand you buy, as mixes vary slightly:

Bag weightYield (mixed)Bags per cubic yard
80 lb~0.6 cu ft~45
60 lb~0.45 cu ft~60
40 lb~0.3 cu ft~90

How thick should the concrete be?

ProjectTypical thickness
Walkway, patio, shed pad4 in
Driveway (passenger cars)5–6 in
Deck post footingsDepth matters more — see the footing guidance below

Common slab sizes at 4 inches (with 10% waste)

SlabCubic yards80 lb bags (approx.)
10 × 10 ft1.36~62
12 × 12 ft1.96~88
10 × 20 ft2.72~123
20 × 20 ft5.43~245

Rule of thumb: past roughly 1–1.5 cubic yards, a ready-mix truck is usually cheaper and far less work than bags.

Sources & assumptions

Concrete FAQs

Length × width × thickness (in ÷ 12) gives cubic feet for a slab; divide by 27 for cubic yards, then add ~10% waste. The calculator converts everything to bag counts too.
About 45. An 80lb bag yields roughly 0.6 cubic feet mixed; 27 ÷ 0.6 = 45. A 60lb bag gives ~60 bags per yard, a 40lb bag ~90.
4 inches for walkways, patios and shed pads; 5–6 inches for a driveway carrying cars.
At 4 inches thick with 10% waste, about 62 bags of 80lb concrete (1.36 cubic yards). Past this size, a ready-mix truck is usually the better call.
Estimates only — always check local building codes and frost depth requirements before pouring. This tool does not replace structural design.