Decking Calculator

Boards, joists, screws and fascia in one pass — a complete materials list for your deck, using actual board widths.

Please check your inputs — values must be within the allowed ranges.

—
Deck boards
—
Joists
—
Screws
—
Fascia boards

Decking calculator vs. deck board calculator

Both are free, and they overlap on the boards. Use whichever matches your job:

Same math underneath, same actual-width handling — pick the output you need.

How the full materials list is calculated

  1. Deck boards: rows = deck width (in) ÷ (actual board width + gap), rounded up. Boards = rows × deck length × (1 + waste) ÷ board length, rounded up.
  2. Joists: deck length (in) ÷ joist spacing + 1 (the +1 is the edge joist). Joists run perpendicular to the boards.
  3. Screws: 2 screws at every board-to-joist crossing = boards × joists × 2.
  4. Fascia: perimeter (2 × length + 2 × width) × (1 + waste) ÷ board length, rounded up.

Example — a 16 × 12 ft deck with 5.5-in boards, 1/8-in gap, 10% waste, 16-in joist spacing: 29 boards, 13 joists, 754 screws, 4 fascia boards.

boards run the 16-ft direction 16 ft 12 ft 26 rows × 16 ft boards = 416 linear ft + 10% waste (cuts, defects) → buy 29 boards 13 joists @ 16 in on center (dashed, beneath)
Top view drawn to scale (1 in = 2 px) for the example above: 26 rows of 5½-in boards across 12 ft, running the 16-ft direction; 13 joists at 16-in on center beneath (dashed). 26 × 16 ft = 416 linear ft; with 10% waste that lands at 29 boards. Illustration only — not a construction plan.

Joist spacing explained

16 inches on center (OC) — meaning 16 in from the center of one joist to the center of the next — is the default for almost all residential decks. It works for pressure-treated 2x6, 2x8 and 2x10 joists at typical spans.

Span limits depend on lumber species, size and spacing — see the AWC DCA6 guide (American Wood Council) for the published tables.

Screw & fastener count

Traditional installs use two screws at every crossing — one on each side of the board, so each board end can't cup or twist. That's the boards × joists × 2 number above; buy them by the box (typical boxes hold 350 or 700).

Hidden fastener systems (clip style, common on composite decks) use one clip set per board per joist instead — roughly boards × joists clips, plus the manufacturer's starter and finish screws. Clips are spaced by the grooved board edge, so follow the brand's install guide for the exact count.

Common deck sizes at a glance

5.5-in boards, 1/8-in gap, 10% waste, 16-ft boards, 16-in OC joists. Boards run along the first dimension listed:

Deck sizeDeck boardsJoistsScrewsFascia boards
8 × 10 ft1382083
10 × 12 ft19103804
12 × 12 ft22104404
12 × 16 ft29137544
16 × 20 ft49161,5685
20 × 20 ft60161,9206

Flip the orientation (boards running the other way) and the board count changes — the calculator reflects whatever dimensions you enter.

Sources & assumptions

Decking FAQs

Rows = deck width (in) ÷ (board width + gap). Linear feet = rows × deck length. Boards = linear feet ÷ board length, plus ~10% waste. Add joists (length in inches ÷ spacing + 1), screws (boards × joists × 2) and fascia (perimeter ÷ board length) for the full list — or let the calculator above do it in one pass.
One that uses actual widths (5.5 in, not "6 inch"), includes gap and waste, shows its formula, and outputs the complete list — boards, joists, screws and fascia. This page does all of it free, no sign-up.
At 16-in on-center spacing: 13 joists (16 ft × 12 ÷ 16 = 12 spaces + 1 edge joist). At 12-in spacing, 17; at 24-in, 9 — if the decking and joist size allow the wider spacing.
Often, yes — many composite brands require 12-in OC for boards installed perpendicular to joists, and 16-in is only allowed for certain products or angles. Check your decking manufacturer's installation guide; the calculator lets you pick either spacing.
Estimates only — always check local building codes and your supplier's actual dimensions before ordering. This tool does not replace structural design.